Products available from just 100 pieces • Fast delivery 3-4 working days • Free samples
To Tailor Made

Filter


UN3373

-

  • Yes (54)

P650

-

  • No (7)
  • Yes (45)

Absorbent ability

-

  • 25 ml (1)

Letterpost

-

  • No (2)
  • Yes (4)

Road Transport

-

  • Yes (59)

Colour

-


Format

-

  • 86 mm x 165 mm (1)
  • 100 mm x 170 mm (1)
  • 220 mm x 281 mm x 470 mm (1)
  • 220 mm x 283 mm x 320 mm (1)
  • 250 mm x 168 mm x 290 mm (1)
  • 300 mm x 185 mm x 359 mm (1)
  • 300 mm x 350 mm x 510 mm (1)

Material

-

  • Cardboard (1)
  • polyethylene (1)
  • Polypropylene (3)

Transparency

-

  • Non transparent (12)
  • Semi transparent (1)

Thickness

-

  • 70 mu (1)

Closure

-

  • Destructive tape (1)

Content

-

  • 170 ml (2)
  • 200 ml (3)
  • 250 ml (1)
  • 265 ml (2)
  • 400 ml (1)
  • 500 ml (2)
  • 600 ml (2)
  • 1000 ml (2)
  • 2000 ml (1)
  • 3000 ml (2)
  • 5000 ml (2)
  • 10000 ml (3)
  • 16000 ml (2)
  • 20000 ml (1)
  • 30000 ml (1)

Number of positions

-

  • 2 (1)

Transport bags + Cooling elements (63)

Number of items per page:

When shipping large quantities of biological materials for medical research, this must take place under refrigerated conditions. Such refrigerated transport requires packaging which keeps the biological materials at the right temperature. MiniGrip has developed a range of professional shipping cases, insulated bags and accompanying cooling elements. All the shipping cases and insulated bags of MiniGrip are made of high-quality materials and have been tested extensively in the day-to-day practice of large numbers of hospitals, laboratories and research institutions. UN3373 Standard – Key Requirements The P650 packaging instructions for liquid substances state:- a. The primary receptacle(s) shall be leak proof and must not contain more than 1L liquid, or sift proof and not contain more than 1kg solid; b. The secondary packaging shall be leak proof for liquids or sift proof for solids; c. If multiple fragile primary receptacles are placed in a single secondary packaging, they shall be either individually wrapped or separated to prevent contact between them; d. If liquid, absorbent material shall be placed between the primary receptacles(s) and the secondary packaging. The absorbent material shall be in quantity sufficient to absorb the entire contents of the primary receptacle(s) so that any release of the liquid substance will not compromise the integrity of the cushioning material or of the outer packaging; e. The primary receptacle or the secondary packaging shall be capable of withstanding, without leakage, an internal pressure of 95 kPa (0.95 bar) at -40C and +55C; f. The outer packaging must be rigid and must not contain more than 4L liquid or 4kg solid. g. One surface of the outer packaging must measure at least 100mm x 100mm h. if there is any doubt as to whether or not residual liquid may be present in the primary receptacle during transport, then a packaging suitable for liquids, including absorbent materials, must be used. An itemised list of contents must be enclosed between the secondary packaging and the outer packaging The packaging must be of good quality and strong enough to withstand the shocks and loadings normally encountered during transport. It must prevent any loss of contents that could occur due to vibration or changes in temperature, humidity or pressure. The completed package must be capable of successfully passing a 1.2 m drop test.

Stay informed!


Would you like to keep informed about the latest developments regarding our packaging and services, special offers and other interesting information?

Register for our newsletter by entering your email address below.