Safetybag

165 mm x 175 mm

Transparent

460909

Safetybag Recycled

165 mm x 155 mm

Transparent

460927

Safetybag International

165 mm x 285 mm

Transparent

460915

Safetybag Pharma

165 mm x 275 mm

Transparent

460904

Safetybag Recycled

160 mm x 270 mm

Transparent

460916

Safetybag met compartment

165 mm x 265 mm

Transparent

460930

Safetybag International with document holder

165 mm x 275 mm

460944

Safetybag Recycled with documentpouch

170 mm x 270 mm

Transparent

460917

Safetybag Bubbel Internationaal

165 mm x 275 mm

Transparent

460698

Safetybag

255 mm x 385 mm

Transparent

460905

Safetybag Pharma

255 mm x 385 mm

Transparent

460907

Safetybag Pharma

295 mm x 420 mm

Transparent

420654

Safetybags® by DaklaPack 

a range of flexible pouches designed as secondary packaging. The pouches are 100% leak and tamper proof.

Available in various sizes, suitable to hold a wide range of primary containers, such as blood tubes, specimen containers and swabs.

The pouches are easy to close. They are sequentially numbered and incorporate a tamper-evident seal to ensure ease of identification and security throughout the chain of custody.

The pouch is made of strong transparent polyethylene, and is guaranteed to keep liquid inside, easy to close -  simply removing the backing strip and applying even pressure across the strip,  the pouch is then hermetically sealed. In combination with the transport blister, the PolyMed mailing envelope and sufficient absorbent material, this composition complies with the packaging regulations (P650 and P959).

We would be happy to quote you for various formats and for printing, on request.

UN3373 Standard – Key Requirements

The P650 packaging instructions for liquid substances state:-

a. The primary receptacle(s) shall be leak proof and must not contain more than 1L liquid, or sift proof and not contain more than 1kg solid;

b. The secondary packaging shall be leak proof for liquids or sift proof for solids;

c. If multiple fragile primary receptacles are placed in a single secondary packaging, they shall be either individually wrapped or separated to prevent contact between them;

d. If liquid, absorbent material shall be placed between the primary receptacles(s) and the secondary packaging. The absorbent material shall be in quantity sufficient to absorb the entire contents of the primary receptacle(s) so that any release of the liquid substance will not compromise the integrity of the cushioning material or of the outer packaging;

e. The primary receptacle or the secondary packaging shall be capable of withstanding, without leakage, an internal pressure of 95 kPa (0.95 bar) at -40C and +55C;

f. The outer packaging must be rigid and must not contain more than 4L liquid or 4kg solid.

g. One surface of the outer packaging must measure at least 100mm x 100mm

h. if there is any doubt as to whether or not residual liquid may be present in the primary receptacle during transport, then a packaging suitable for liquids, including absorbent materials, must be used.

An itemised list of contents must be enclosed between the secondary packaging and the outer packaging

The packaging must be of good quality and strong enough to withstand the shocks and loadings normally encountered during transport. It must prevent any loss of contents that could occur due to vibration or changes in temperature, humidity or pressure.

The completed package must be capable of successfully passing a 1.2 m drop test.